Brazas Fire > Blog > Fire Suppression System > Steps to Follow to Determine if Your Albuquerque Commercial Building Requires a Fire Suppression System

Steps to Follow to Determine if Your Albuquerque Commercial Building Requires a Fire Suppression System

When preventing damage to your property caused by fire, having the appropriate fire extinguishing equipment on hand is necessary. Sprinkler systems are the default choice for fire protection in commercial properties such as office buildings, retail stores, and other similar establishments. However, there may be better solutions than this.

After all, water may cause just as much, if not more, damage to fragile paper documents, irreplaceable archives, and sensitive electronic equipment as fire and smoke can. In addition, putting water on certain kinds of flames is incredibly useless and helps the fires spread farther.

Automatic fire suppression is an excellent alternative to traditional methods of protecting your property from damage caused by fire. This method utilizes wet chemicals, dry chemicals, gases, liquids, or foam to extinguish flames while reducing the amount of property damage, clean-up, and downtime your company experiences.


In a nutshell, you need a fire suppression system if you run a company with sensitive assets and electronic equipment or if water is not an appropriate extinguisher for the sorts of fires that might start in your structure. The following is a list of various industries that find this form of fire protection to be beneficial: 


If you try to put out a grease fire with water, the water will splash around and spread the flames. Because of this, businesses that serve food have to have fire suppression equipment in their kitchens. When it is released, the wet chemical extinguishing agent immediately begins to cool the metal cooking surfaces and begins a process called saponification, which reacts with the hot fat and oil to produce soap. The residue left behind is simple to wipe up, which means you will be able to get back to business as usual in no time. 


The operator is in a very precarious position because of the elevated risk of fire posed by oversized trucks employed for industrial and commercial reasons. Fire suppression systems for commercial vehicles are designed to extinguish blazes that originate in components such as the engine, battery, gearbox, brakes, and hoses, among other places. Both dry and wet chemical agents can be used effectively in the fight against fires in commercial vehicles. 


The potential for chemical leaks, spills, and fume buildup is present in various industrial structures, including steel mills, chemical factories, printing presses, and others. Because of these dangers, your facility, its contents, and your employees must be protected by industrial fire suppression in an emergency.


Fire suppression equipment in an auto body paint shop is essential if you want to maintain a safe working environment despite potentially harmful chemicals and fumes. For this purpose, dry chemical agents of industrial strength are the most appropriate choice. 


If a fire breaks out in a room containing combustible gases, flammable liquids, or other potentially hazardous components, water will only serve to spread the flames. Dry chemicals are typically employed for fire suppression in hazardous material storage facilities; this assists in preventing possible fires from spreading uncontrollably.

DATA/IT Centers, as well as Server Rooms

Because water and electricity do not combine well, your server room or data center must be outfitted with a technique of extinguishing different from fire sprinklers. Because of the ozone-depleting features that Halon possessed, this substance is no longer used to suppress fires that do not involve water use. Halon was previously widely used for this purpose. You may cut down on the amount of cleaning required while protecting sensitive machinery by installing the appropriate fire suppression system. It is advised that cleaning products be used for this application. 


Most buildings may have very low fire risks, but one of your enclosures provides a significantly higher risk. In this situation, you should make plans to deploy micro-environment fire suppression systems as needed within specific machinery, vehicles, rooms, or storage compartments. The self-activating technology guarantees the total extinguishment of the fire within a few seconds. 


Suppose you establish that a fire suppression system is necessary for your structure. In that case, the following step is to choose the type of extinguishing agent that will be most effective in meeting the requirements of your building. The following are the many kinds of fire suppression systems that State Systems is authorized to design, install, and provide maintenance for:

Wet chemical: The chemicals in wet chemical fire suppression systems, such as potassium acetate and sometimes potassium citrate or potassium bicarbonate, are suitable for putting out grease fires. These compounds may be found in wet chemical fire suppression systems.

A dry chemical: Dry chemicals, such as sodium bicarbonate, potassium bicarbonate, or monoammonium phosphate, can be used to protect unoccupied industrial facilities that contain hazardous products or flammable liquids. Because they are non-conductive, they can be used in locations with energized electrical equipment.

Clean agents: FM-200, 3M Novec 1230, non-toxic Inergen, carbon dioxide, Argonite, and FE-13, designed to replace Halon, are all examples of clean agents that may be employed for fire suppression. These are suitable for protecting essential assets that can be harmed by fire suppression systems that use water or other extinguishing agents.


Turn to State Systems for all your fire protection requirements, whether you own a restaurant in Albuquerque, manage a storage place for hazardous goods, or run a server room in either of these locations. We provide a comprehensive selection of fire suppression systems from various today’s most reputable manufacturers.

You may reach us online or give Brazas Fire a call at 505-889-8999 right now if you have any questions regarding the fire protection services we provide or if you would like an installation estimate.